Applications for Ink/plastic/paint Pigment Red 53:1

Applications for Ink/plastic/paint Pigment Red 53:1
Product Details

C. I. Pigment Index: C. I. Pigment Red 53:1
 Trade Names: Lake Red C
 Chemical Family: Azo

PHYSICAL AND CHEMICAL DATA
 Color Shade: Greenish yellow
 Molecular Weight:
 Molecular Formula:
 Oil absorption(ml/100g):
 PH: 6.5-7.5

Fastness Properties
 Light Fastness: 6 -7
 Heat Resistance: 160 ℃
 Water Resistance: 5
 Oil Resistance: 4
 Acid Resistance: 5
 Alkali Resistance: 5

Molecule Formula: C34H24CI2N4O8S2Ba                  
 Molecule Weight:888.98
 Chemical Name(IUPAC Name or CA Index Name):C.I. Pigment Red53:1  CAS NO : 5160-02-1
 Content% :100%
 3.HAZARDOUS INGREDIENTS
 The product is not considered to be hazardous and/or poisoner under OSHA’S Hazard
 Communication Standard(29 CFR 1910.1200)
 4.FIRE&EXPLOSION HAZARDS
 Flammability Classification:DOT,non-flammable  
 Flash Point:              N/A high melting material
 Extinguishing Media:      Carbon dioxide,dry chemical,or foam recommended
 5.HAZARD INFORMATION
 Health Hazard data:
 Skin& eye irritation studies have reported to be negative.No evidence of absorption or advise health effects based on animal test

Rortes of exposure

  1. Inhalation:should be avoided by wearing on approved dust mask

  2. Skin contact:under normal condition of good industrial hygiene,not expected to be irritant

  3. Skin absorption:no data available. however,not expect to be absorbed through skin

  4. Eye contact:should be avoided by wearing approved safety glasses,if not,may cause eye irritation

  5. Ingestion:considered to be practically non-toxic

Emergency& First Aid Procedure

  1. Inhalation removed to clean,fresh air and treat symptomatically

  2. Skin:wash with water,if symptoms occur,consult physician

  3. Eye contact:flush thoroughly with copious amounts of water for at least 15 minutes,if irritation persists,consult physician

  4. Ingestion:treat symptomatically

6.SPECIFICATION AND PROPERTIES
 Shade:  Approximate to the standard
 Tinting strength: 100% of the standard
 Volatile matters at 105℃  2.%max
 Soluble matter in water:  2%max
 Oil absorption: 45
 Fastness to light: 4
 Fastness to heat: 50℃
 Resistance to alkalis: 2
 Bleeding in water: 4
 Bleeding in oil : 4
 Resistance to acids: 3
 7.REACTIVITY DATA
 Stability stable
 Conditions to avoid None known
 Incompatibility Strong oxidizing agent
 Hazardous decomposition products when involved in fire,burning organic pigment may evolve noxious fumes which include carbon monoxide,nitrous oxide,or other toxic compounds,depending on the pigment type
 Hazardous polymerization will not occur
 Conditions to avoid none known
 8.SPILL OR LEAK PROCEDURES
 Pigment spillage should be cleaned at once.Dry power spillage is often best treated first by diluting with sand of other inert material prior to sweep up.Vacuum cleaners are recommended.Airborne organic dust may be explosion hazard,secure possible sours of ignition and avoids dusting.
 Waste disposal method,disposal of this material must be made accordance with federal,state and local regulations.
 9.SPECIAL PROTECTION METHOD.
 Respiration protection NIOSH approved dust respiration recommended when handling in areas of pigment dusting.
 Ventilation Local exhaust ventilation or containment recommended controlling dust exposure. protective gloves recommended.
 Eye protection safety glass recommended.
 Other protective equipment impervious clothing should be wrom when contact is likely such as when cleaning rp spills of large amounts.
 10.SPECIAL PERSUASIONS 
 A moderately cool dry,well ventilated area is considered adequate for the storage of pigment containers,direct sources of heat must be avoided and open containers must be allowed to stand over extended periods of time.Position containers so that any labeling information on the containers is visible;
 11.HMIS RATING
 Health  1
 Flammability   1
 Reactivity  0
 P.P.E.
 12.TRANSPORTATION REQUIREMENTS
 D.O.T Proper shipping name(49 CFR 172.101)   Pigment Dry NOI
 D.O.T Hazard Classification(49 CFR 172)   None,none-hazardous
 D.O.T Label required  None
 Hazardous Waste   None

Huamao Chemicals is one of the leading certified applications for ink/plastic/paint pigment red 53:1 manufacturers and suppliers in China, offering you the quotation consultation. Welcome to buy the low price and high quality bulk pigment made in China from our factory.

Feedback