C. I. Pigment Index: C. I. Pigment Red 53:1 Trade Names: Lake Red C Chemical Family: Azo PHYSICAL AND CHEMICAL DATA Color Shade: Greenish yellow Molecular Weight: Molecular Formula: Oil absorption(ml/100g): PH: 6.5-7.5 Fastness Properties Light Fastness: 6 -7 Heat Resistance: 160 ℃ Water...
C. I. Pigment Index: C. I. Pigment Red 53:1
Trade Names: Lake Red C
Chemical Family: Azo
PHYSICAL AND CHEMICAL DATA
Color Shade: Greenish yellow
Light Fastness: 6 -7
Heat Resistance: 160 ℃
Water Resistance: 5
Oil Resistance: 4
Acid Resistance: 5
Alkali Resistance: 5
Molecule Formula: C34H24CI2N4O8S2Ba
Chemical Name(IUPAC Name or CA Index Name):C.I. Pigment Red53:1 CAS NO : 5160-02-1
The product is not considered to be hazardous and/or poisoner under OSHA’S Hazard
Communication Standard(29 CFR 1910.1200)
Flash Point: N/A high melting material
Extinguishing Media: Carbon dioxide,dry chemical,or foam recommended
Health Hazard data:
Skin& eye irritation studies have reported to be negative.No evidence of absorption or advise health effects based on animal test
Rortes of exposure
Inhalation:should be avoided by wearing on approved dust mask
Skin contact:under normal condition of good industrial hygiene,not expected to be irritant
Skin absorption:no data available. however,not expect to be absorbed through skin
Eye contact:should be avoided by wearing approved safety glasses,if not,may cause eye irritation
Ingestion:considered to be practically non-toxic
Emergency& First Aid Procedure
Inhalation removed to clean,fresh air and treat symptomatically
Skin:wash with water,if symptoms occur,consult physician
Eye contact:flush thoroughly with copious amounts of water for at least 15 minutes,if irritation persists,consult physician
6.SPECIFICATION AND PROPERTIES
Shade: Approximate to the standard
Tinting strength: 100% of the standard
Volatile matters at 105℃ 2.%max
Soluble matter in water: 2%max
Oil absorption: 45
Fastness to light: 4
Fastness to heat: 50℃
Resistance to alkalis: 2
Bleeding in water: 4
Bleeding in oil : 4
Resistance to acids: 3
Conditions to avoid None known
Incompatibility Strong oxidizing agent
Hazardous decomposition products when involved in fire,burning organic pigment may evolve noxious fumes which include carbon monoxide,nitrous oxide,or other toxic compounds,depending on the pigment type
Hazardous polymerization will not occur
Conditions to avoid none known
8.SPILL OR LEAK PROCEDURES
Pigment spillage should be cleaned at once.Dry power spillage is often best treated first by diluting with sand of other inert material prior to sweep up.Vacuum cleaners are recommended.Airborne organic dust may be explosion hazard,secure possible sours of ignition and avoids dusting.
Waste disposal method,disposal of this material must be made accordance with federal,state and local regulations.
9.SPECIAL PROTECTION METHOD.
Respiration protection NIOSH approved dust respiration recommended when handling in areas of pigment dusting.
Ventilation Local exhaust ventilation or containment recommended controlling dust exposure. protective gloves recommended.
Eye protection safety glass recommended.
Other protective equipment impervious clothing should be wrom when contact is likely such as when cleaning rp spills of large amounts.
A moderately cool dry,well ventilated area is considered adequate for the storage of pigment containers,direct sources of heat must be avoided and open containers must be allowed to stand over extended periods of time.Position containers so that any labeling information on the containers is visible;
D.O.T Proper shipping name(49 CFR 172.101) Pigment Dry NOI
D.O.T Hazard Classification(49 CFR 172) None,none-hazardous
D.O.T Label required None
Hazardous Waste None
Huamao Chemicals is one of the leading certified applications for ink/plastic/paint pigment red 53:1 manufacturers and suppliers in China, offering you the quotation consultation. Welcome to buy the low price and high quality bulk pigment made in China from our factory.